Maximum span of steel plant without intermediate columns? Maximum span of beam in brick structure?

Maximum span of steel structure plant without intermediate columns

The maximum span of a steel structure workshop can be determined by a variety of factors, including design standards, loading requirements, structural form and material strength. Generally speaking, the maximum span of a steel structure workshop without intermediate columns can reach tens of meters or even larger. The following are some common ranges of maximum span of steel structure plant:

1.Light steel structure plant: usually has smaller span, generally ranging from 10-20 meters, which may vary according to the actual situation.

2.Medium girder steel truss plant: by setting up trusses with larger spacing for support, a larger span can be realized. The maximum span can reach about 50-100 meters.

3.Spatial mesh frame steel structure plant: by using three-dimensional structure for support, a larger span can be realized. The maximum span can be more than 100 meters.

It should be noted that the specific maximum span will also be limited by the design standards and loading requirements, and the structural design must be carried out in accordance with the corresponding specifications and requirements to ensure the safety and stability of the plant. If you need to build a steel structure plant building without intermediate columns, it is recommended to consult professional structural engineers or designers to customize the design and construction plan according to the requirements and conditions of the specific project. They can provide suitable design solutions according to your needs and budget, and ensure the strength and stability of the structure meets the relevant requirements.

Maximum span of beams in brick structures

The maximum span of brick structure house is 200*550, the load-bearing structure of frame structure house is beams, slabs and columns, while the load-bearing structure of brick structure house is floor and wall. In terms of firmness, theoretically speaking, the frame structure can achieve greater firmness than the brick structure, so the brick structure in the architectural design, the height of the building can not be more than 6 floors, while the frame structure can do dozens of floors. However, in the actual construction process, the state provides for the building to achieve the seismic grade, whether brick or frame, to achieve this level, and developers even if the use of frame structure to build a house, will not be in order to improve the degree of solidity of the building and increase the investment, as long as it meets the seismic grade can be.